How to Review a 3D Aligner Setup Before Approval
The digital setup is the moment an aligner case is really decided. Once you approve it, the trays are made to that plan, and every problem built into it travels into the patient's mouth. Yet many clinicians, especially early on, approve setups after a quick look at the animation and the final smile.
This guide sets out a practical order for reviewing a 3D setup, so that the plan you approve is one you would defend. It is vendor-neutral and written for dentists and orthodontists in Pakistan.
Treat the setup as a proposal
Planning software, and the technician who prepares the first version, can only work from the records you send and the instructions you give. The first setup is a draft. Your job is to check it against your diagnosis and change it until it matches what you intend to achieve.
It also helps to remember that the setup shows where the teeth are programmed to go, not where they will end up. In a prospective study of 38 patients, the mean accuracy of all measured tooth movements with one widely used aligner system was 50%. Buccal-lingual crown tipping was the most accurate at 56%, and rotation the least at 46%. Accuracy was especially low for mesial rotation of the lower first molar (28%), intrusion of the lower incisors (35%) and distal rotation of the upper canine (37%) (Haouili et al., 2020). A setup that relies heavily on these movements needs extra support or a planned refinement.
Different software can also produce different end positions from the same instructions. When the same planned movements were entered into four virtual setup programs for 32 patients, the final models differed significantly between programs, although the number of aligners did not change (Eliliwi et al., 2023). What you see on screen is shaped by the software as well as by the plan.
Step 1: Check the starting point
Before looking at any movement, confirm that the setup starts from an accurate picture of the patient:
- The scans are complete, with no missing molars, holes or distortion.
- The bite in the software matches the bite you recorded in the clinic.
- Restorations, missing teeth and any teeth to be extracted are shown correctly.
- Teeth that should not move, such as implants, ankylosed teeth or bridges, are locked.
Problems with records are a common hidden cause of poor tracking. Our records checklist covers what to capture.
Step 2: Compare the goal with your diagnosis
Look at the final position first and ask whether it matches your treatment objectives:
- Are the planned changes to crowding, overjet, overbite, midlines and buccal occlusion the ones you wrote in your diagnosis?
- Is the case being treated with the approach you chose, for example expansion, IPR, distalisation or extraction, and not quietly switched to another?
- Is the facial and smile outcome sensible, including incisor display and lip support?
If the end goal is wrong, there is no point checking the steps to reach it.
Step 3: Read the movement table, not just the animation
The animation is persuasive and easy to misread. The movement table, or tooth movement report, shows the numbers for each tooth. Check:
- Large movements in a single direction, especially rotations of rounded teeth, molar movements and lower incisor intrusion.
- Root movements such as torque and bodily translation, which aligners deliver less predictably than tipping.
- Expansion in millimetres per side, and whether it is realistic for the patient's bone and age.
- Teeth moving back and forth across stages without a clear reason.
Where a movement is known to be difficult, decide whether to reduce it, add an auxiliary, over-correct it in the plan, or accept that a refinement will be needed. Our article on clear aligner refinements and tracking errors explains how this plays out.
Step 4: Check staging
Staging is the order in which teeth move. A good sequence makes room before teeth move into it and avoids collisions. Look for:
- Space created before crowded teeth are aligned.
- Anchorage teeth held still while others move.
- A sensible number of stages for the amount of movement.
- No impossible overlaps between neighbouring teeth.
Our guide to aligner staging protocols covers common sequences.
Step 5: Review attachments and auxiliaries
Every attachment should have a purpose you can name. Check that attachments are present where you need rotation, extrusion or root control, that they are not placed on restorations where bonding is unreliable, and that elastics, precision cuts or buttons appear where the plan needs them. Our attachment design guide explains the common shapes.
Step 6: Check IPR
Look at the IPR chart for each contact: how much, and at which stage. Confirm that the amounts are within what each tooth can tolerate, that the stage gives you access to the contact, and that the total makes sense for the space needed. Our article on IPR in clear aligner therapy covers the details.
Step 7: Think about roots and bone
Most setups show crowns only. Roots and bone are where many risks lie, particularly with expansion, proclination and torque in adults with thin bone.
A survey study showed 70 orthodontists the same four patients as crown-only setups and then with crown, root and bone visualisation. Across the four patients, 33% to 43% of respondents changed their view of the treatment plan once roots and bone were shown. When the added view confirmed dehiscence and fenestration, clinicians who had been satisfied with the crown-only plan became dissatisfied (Tüfekçi et al., 2024).
You do not need CBCT for every case, but you do need to consider bone. Use your radiographs, and CBCT where it is clinically justified, to check whether roots will be moved through thin cortical bone.
Step 8: Check the final occlusion
Before you approve, look at the end position from every angle:
- Even posterior contacts, with no teeth left out of occlusion.
- Overjet and overbite within your target range.
- Midlines and canine relationships as planned.
- No interferences in lateral and protrusive movements, where the software shows them.
Approve, then record your reasons
When you approve, note in the patient's records what you changed from the first setup and why, which movements you expect to be difficult, and whether a refinement is likely. This makes the case easier to manage later and gives you a reference if the result is questioned.
Training and mentorship
Setup review is a skill that improves fastest with feedback. If you would like an experienced clinician to go through your setups with you, FOAP can arrange training and mentorship on request. Fill in the FOAP form and our team will contact you with the next steps.
References
- Haouili N, Kravitz ND, Vaid NR, Ferguson DJ, Makki L. Has Invisalign improved? A prospective follow-up study on the efficacy of tooth movement with Invisalign. American Journal of Orthodontics and Dentofacial Orthopedics. 2020. doi:10.1016/j.ajodo.2019.12.015
- Eliliwi M, ElShebiny T, de Menezes LM, Stefanovic N, Palomo JM. Comparing virtual setup software programs for clear aligner treatment. Journal of the World Federation of Orthodontists. 2023. doi:10.1016/j.ejwf.2023.02.004
- Tüfekçi E, Carrico CK, Gordon CB, Lindauer SJ. Does crown, root, and bone visualization in a clear aligner virtual setup impact treatment decisions? American Journal of Orthodontics and Dentofacial Orthopedics. 2024. doi:10.1016/j.ajodo.2024.01.014
This article is for dental professionals and is not a substitute for clinical judgment or formal training.