Intraoral Scanners for Aligner Work: Types and What to Compare

A dentist in gloves scans a patient's teeth with an intraoral scanner in a bright clinic

An intraoral scanner is now central to most aligner workflows. It replaces the impression tray with a digital model that goes straight into treatment planning, and it lets you compare a patient's progress with the original plan. For a clinic in Pakistan, a scanner is also a significant investment, so it is worth knowing what to compare before you buy.

This guide explains how scanners fit into aligner treatment, what the research says about accuracy, and the practical points that matter in daily use.

How scanners are used in aligner treatment

A scanner supports aligner work at several stages:

  • Records: a full-arch scan at the start replaces alginate or PVS impressions and plaster models.
  • Treatment planning: the scan is uploaded to the aligner provider or planning software to build the digital setup.
  • Monitoring: a new scan mid-treatment shows whether teeth are following the plan. Our article on mid-course correction explains how this helps catch tracking problems early.
  • Refinements: an updated scan is the basis for any refinement aligners. See Clear Aligner Refinements.
  • Retention: a final scan is used to make retainers, and can be kept on file if a retainer is lost. See Retention After Aligner Therapy.
  • Patient communication: showing a patient their own 3D scan often makes the problem, and the plan, easier to understand.

What the research says about accuracy

Accuracy is usually described in two ways. Trueness is how close the scan is to the real teeth. Precision is how consistent repeated scans are with each other.

A systematic review in the European Journal of Orthodontics compared measurements from intraoral scans with measurements from conventional plaster models (Aragón et al., 2016). It looked at measurements used in orthodontics, such as tooth widths and Bolton ratios. The review included only four studies, so the evidence base was small.

A broader systematic review of 32 studies found that scanners can be relied on for diagnostic use and short-span scans, but that whole-arch scans are more prone to deviation (Abduo and Elseyoufi, 2018). Results varied between scanner systems. The authors also found that accuracy improves with a shorter scan span and with clean surfaces that have few irregularities.

For aligner work, which needs full-arch scans, two practical points follow:

  • Scanning technique matters as much as the scanner. Training your team to follow a consistent scanning path is worth the time.
  • Check the full-arch accuracy data for any scanner you consider, not just its headline speed.

Types of scanners

Most current intraoral scanners use optical imaging to build a 3D model as the wand moves over the teeth. The differences that matter in practice are usually:

  • Connection: some scanners connect by cable to a cart or laptop, and others are wireless.
  • Colour or monochrome: colour scans help patient communication and show soft tissue more clearly.
  • Software model: some systems come with planning software and a subscription, while others focus on capturing the scan and exporting it.
  • Open or closed files: some systems export standard STL files to any provider, and others work best within one company's workflow.

What to compare before buying

Compatibility with your aligner providers

Check that the scanner can send scans to the aligner companies and labs you use, or plan to use. A scanner that only works with one provider limits your choices later. Ask whether it exports open STL files.

Full-arch accuracy and scan time

Ask for published or independent data on full-arch accuracy. Then try a full-arch scan yourself on a real patient, not only a demo model, and time it.

Wand size and patient comfort

A smaller tip makes it easier to reach the back teeth in patients with a small mouth or limited opening. Comfort also matters for children and anxious patients.

Computer requirements

Many scanners need a powerful laptop or computer, with a specific graphics card and processor. Check the exact requirements, and whether a suitable laptop is included, before you compare prices.

Infection control

Check how the scanner tip is cleaned or sterilised, whether tips are autoclavable or single-use, and what spare tips cost.

Running costs

Look beyond the purchase price. Ask about software subscriptions, warranty length, and the cost of repairs and replacement tips.

Local support and training

Find out whether the supplier has a service team in Pakistan, how long repairs take, and whether a loan unit is available. Ask what training is included for you and your staff.

Is a scanner worth it for your clinic?

A scanner makes most sense when you treat aligner cases regularly, or plan to. It also supports other digital work, such as restorations and implant planning. If you treat only a few aligner cases a year, a lab or provider that accepts conventional impressions, or offers scanning, may be a better start.

Learn more with FOAP

Digital records are only as useful as the clinical decisions built on them. If you want structured training in aligner planning and digital workflows, fill in the FOAP form and our team will contact you with the next steps.

References

  1. Aragón ML, Pontes LF, Bichara LM, Flores-Mir C, Normando D. Validity and reliability of intraoral scanners compared to conventional gypsum models measurements: a systematic review. European Journal of Orthodontics. 2016. doi:10.1093/ejo/cjw033
  2. Abduo J, Elseyoufi M. Accuracy of intraoral scanners: a systematic review of influencing factors. European Journal of Prosthodontics and Restorative Dentistry. 2018. doi:10.1922/ejprd_01752abduo21

This article is for dental professionals and does not recommend any specific scanner or supplier.

Redefining Pakistani Smiles,
Pioneering Aligner Excellence in Pakistan

Become a member